When Will Canon Vixia Mini X Be Available Again

List of Messages (in alphabetical social club)

Bulletin	Possible solution
Back up recordings regularly	This message may appear when you turn on the camcorder. In the event of a malfunction, recordings may be lost and then back up your recordings regularly.
Cannot catechumen scenes recorded using interval recording.	Interval scenes cannot be converted or resized. Join the interval scenes into a single scene.
Cannot convert the scene	Scenes that were recorded or edited with other devices cannot be converted to MP4 scenes.
Cannot join 24P and 30P scenes to convert them	Scenes that were recorded using different frame rates cannot be joined to a unmarried scene when converted or resized.
Cannot load canvas	The canvas file that was saved on the retention carte is corrupted. Canvas information cannot be read from canvas files created using other devices.
Cannot play back	You may not be able to play dorsum scenes that were recorded with other devices or created or edited on a computer. At that place is a problem with the memory menu. If this message appears often without apparent reason, contact a Canon Service Middle.
Cannot play dorsum Cheque the retentiveness card	At that place is a trouble with the retention card. Save your recordings and initialize the memory card using the [Complete Initialization] option. If the problem persists, utilise a different retentivity card.
Cannot play the movies on this memory carte	Movies cannot exist played back from a 64 MB or smaller retentivity menu. Use a recommended retentiveness bill of fare.
Cannot play the movies on this memory card Initialize only using the camcorder	The retention bill of fare in the camcorder was initialized using a calculator. Initialize the memory card with this camcorder.
Cannot record	Y'all cannot capture video snapshot scenes from scenes recorded or edited using some other device. In that location is a trouble with the memory card. If this bulletin appears oft without apparent reason, contact a Catechism Service Eye.
Cannot record Check the memory card	In that location is a problem with the retentiveness card. Save your recordings and initialize the memory carte du jour using the [Complete Initialization] option. If the problem persists, use a different memory bill of fare.
Cannot tape movies on this memory bill of fare	Movies cannot be recorded on a 64 MB or smaller retentiveness card. Employ a recommended memory card.
Cannot record movies on this retention card Initialize merely using the camcorder	The retention card in the camcorder was initialized using a computer. Initialize the memory menu with this camcorder.
Cannot salve the canvass	Cannot save your [Pens and Stamps] drawings on the memory carte. Save your recordings and initialize the memory card.
Cannot trim the scene	Scenes that were recorded or edited with other devices cannot be trimmed with this camcorder.
Charge the battery pack	Bombardment pack is exhausted. Accuse the battery pack.
Check the memory card	Cannot access the memory card. Bank check the memory bill of fare and make certain it is inserted correctly. A memory bill of fare fault occurred. The camcorder cannot record or display the prototype. Try removing and reinserting the retentivity bill of fare, or utilise a unlike memory menu. If after the message disappears, [ ] appears in cerise, perform the post-obit: Plow off the camcorder and remove and reinsert the memory bill of fare. If [ ] turns back to dark-green yous can resume recording/playback. If the problem persists, save your recordings and initialize the retentivity carte.
File name error	The folder and file numbers take reached their maximum value. Set [Other Settings] > [Camera Setup]> [File Numbering] to [Reset] and delete all the movies and photos on the retention card or initialize it.
Initialize but using the camcorder	There is a problem with the file arrangement that prevents accessing the retentivity carte du jour. Initialize the retentiveness card with this camcorder.
LCD Screen has been dimmed Use the [LCD Backlight] setting to change the effulgence	Change the [Other Settings] > [Display Setup] > [LCD Backlight] setting to [Normal] or [Bright].
May not be possible to record movies on this retentiveness card	Y'all may non be able to record movies on a memory card without a Speed Class rating or with ane rated SD Speed Class 2, 4 or vi. Supplant the memory menu with ane rated SD Speed Class 10.
Retentiveness menu is full	The memory card is full. Delete some recordings to free some space or replace the retention card.
Retention card writing error Attempt to recover the data?	This bulletin volition appear the next time y'all plow on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the retentiveness menu. Select [Recover] to try to recover the recordings. If you inserted a memory menu that contains scenes recorded using some other device, we recommend that you select [No].
No memory carte du jour	Insert a uniform memory card into the camcorder. The memory card may not exist inserted correctly. Insert the memory card all the way into the retentiveness menu slot until information technology clicks.
Non enough available space	Delete some recordings on the memory carte du jour or select [4 Mbps] for the conversion.
Recording was stopped due to insufficient write speed of the retentiveness carte	The data transfer rate was as well high for the retention card in use and the recording was stopped. Supplant the memory carte with i rated SD Speed Form ten. After repeatedly recording, deleting and editing scenes (fragmented memory), information technology will take longer to write data on the retention carte and recording may end. Save your recordings and initialize the memory card using the [Complete Initialization] selection.
Scene recorded using some other device. Cannot play back the scene.	Scenes that were non recorded with this camcorder cannot be played dorsum.
Select the desired scene number	A number of scenes take the same recording engagement but unlike file command data. This tin can occur for case when you record movies in the area of the international date line. Select a number to display the respective grouping of scenes.
Some scenes could not be deleted	Movies that were protected/edited with other devices cannot be deleted with this camcorder.
Task in progress. Do not disconnect the power source.	The camcorder is updating the retentiveness menu. Await until the operation ends and do non remove the battery pack.
This photograph cannot be displayed	You may not exist able to display photos taken with other devices or image files created or edited on a reckoner.
To record video on this retentivity card, it is recommended to utilise [Long Play] video quality.	When using a memory card rated SD Speed Class 2, iv or 6, you may non be able to record movies using a video quality option other than 4 Mbps.
Also many photos and MP4 movies. Disconnect the USB cable.	Disconnect the USB cable. Try using a memory carte du jour reader or subtract the number of photos and movies on the retention card to fewer than 2,500 (Windows), or 1,000 (Mac Os). If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection later on a short while.
Unable to recover data	Could not recover a corrupted file. Save your recordings and initialize the retention card using the [Complete Initialization] option.

Listing of Messages for Wi-Fi Functions

Refer also to the instruction manual of your admission point and other devices y'all will use.

Message	Possible solution
Another user is already controlling the camcorder. Try once more afterwards.	This bulletin appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and and so affect Retry.
IP accost conflict	Change the camcorders IP address to avoid any disharmonize with devices connected to the same network. Alternatively, change the IP accost of the conflicting device.
Multiple admission points detected. Try the operation again.	There are multiple access points sending out a WPS signal at the aforementioned time. Try the operation again afterwards or perform setup using the [WPS: PIN Code] or [Search for Admission Points] option.
No access points constitute	The access point set in the camcorder could not exist institute. Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camcorder in a location further away from such appliances. Make sure that you use the access points SSID for the camcorders Wi-Fi settings. If the access point is using MAC accost filtering, enter the camcorders MAC accost in the access points configuration screen.
Unable to access configuration files	Plow off the camcorder. After a brusk while, turn it on again. If the problem persists contact a Canon Service Center.
Unable to complete WPS.	Plow off the camcorder and admission betoken (wireless router). After a brusque while, turn them on once again and effort once again. If the problem persists, perform setup using the [Search for Access Points] option.
Unable to complete WPS. Try the operation over again.	Some access points crave pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your access point. Make certain to bear upon [OK] on the camcorders screen inside 2 minutes of activating the Wi-Fi Protected Setup signal on the access point, whether by pressing the button or by entering the PIN lawmaking.
Unable to connect	Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Attempt using the camcorder in a location further away from such appliances.
Unable to obtain an IP address	If you lot are not using a DHCP server, connect using the [Manual Setup] option and enter the IP address using the [Manual] selection. Turn on the DHCP server. If it is already on, make sure it is functioning properly. Make sure the address range for the DHCP server is sufficient. Turn on the DNS server. If it is already on, make sure it is performance properly. Make sure that the DNS servers IP address and the name for that address are correctly configured. Set the DNS servers IP address in the camcorder. If you are not using a DNS server, set up the DNS address to [0.0.0.0]. If yous are using a wireless gateway router, brand certain all of the devices in the network, including the camcorder, are configured with the correct gateway address.
Wi-Fi hallmark unsuccessful	Make sure the camcorder and access point are using the same authentication/encryption method and encryption cardinal. If the access indicate is using MAC address filtering, enter the camcorders MAC address in the access points configuration screen.
Wi-Fi connectedness terminated	Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless betoken. Endeavour using the camcorder in a location further abroad from such appliances. The camcorder may not be able to connect to the admission point if too many devices are accessing it. Afterwards a short while, establish the connexion again.
Wi-Fi error. Incorrect hallmark method.	Make sure the camcorder and access point are correctly configured. Make sure the camcorder and access point are using the aforementioned authentication/encryption method and encryption key. If the access bespeak is using MAC accost filtering, enter the camcorders MAC address in the access points configuration screen.
Wi-Fi error. Wrong encryption central.	The encryption key (password) is instance sensitive and then make sure to enter it correctly.
Wi-Fi error. Incorrect encryption method.	Brand certain the camcorder and access betoken are using the same authentication/encryption method. If the access point is using MAC address filtering, enter the camcorders MAC address in the admission points configuration screen.
Wireless communication is not working correctly	Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless betoken. Try using the camcorder in a location farther away from such appliances. Turn off the camcorder and access point (wireless router). After a short while, turn them on over again and perform the Wi-Fi network setup again. If the trouble persists contact a Canon Service Center.

List of Messages for Web Services

Message	Possible solution
Check network settings	The network settings in the camcorder are not correctly configured. Bank check the connection signal, SSID and other network settings.
Connect to a computer and apply supplied software to set up This service may not exist available in your region	To utilize Web services, set up in the camcorder the settings saved on CANON epitome GATEWAY. Install ImageBrowser EX and CameraWindow in your computer and configure the settings using CANON iMAGE GATEWAY.
Connect to a computer and use the supplied software to set again	An error occurred when connecting to the CANON epitome GATEWAY server. Check the settings saved on Canon paradigm GATEWAY and fix them again in the camcorder.
Insufficient infinite on server	You have exceeded the amount of data you can relieve on the Canon iMAGE GATEWAY server. Delete some data to free some space.
Movie must be less than X min.	Yous attempted to send a movie whose length exceeds the maximum length allowed by the Web service (the maximum length differs according to the Web service). Shorten the motion-picture show and try sending it again.
Server busy Try once more subsequently	The CANON iMAGE GATEWAY server is busy due to a loftier number of users trying to connect to the server. End the Wi-Fi connection and try again later.
This image cannot be sent	Y'all attempted to ship a type of recording or a file with a size that is not supported past the selected Web service. Bank check the recording before sending.
Attempt again	An mistake occurred when connecting to the CANON paradigm GATEWAY server or the server is temporarily downwards. Finish the Wi-Fi connection and try once again.

hughesdoultitene.blogspot.com

Source: https://support.usa.canon.com/kb/index?page=content&id=ART141282

Share this post